↑ Volver a Curvadora de Perfiles

Angle Roller R-H55

The Baileigh Industrial R-H55 angle roller is perfect for bending round tube and pipe, sections, bar, and angle iron into large sweeping radii. This machine uses three driven rolls that are powered by a 220 volt three phase 5hp motor via a direct drive transmission that offer enough power to roll 4” round tubing with a .083 wall thickness.   In order to achieve capacity like this the R-H55 is built from a heavy steel plate that is mounted on a fully welded steel housing.  Like all section benders from Baileigh Industrial, this one can be operated in the vertical mode for smaller diameters and laid on its back for horizontal bending when larger diameters are required.

The R-H55 angle roller has industrial grade hydraulics for positioning the top roll. The top roll position is controlled by the operator and the final descent and upward position is controlled by a hydraulic cylinder that has a digital readout for positioning.  The DRO makes this roller bender repeatable which is very important for those multiple piece production runs. The R-H55 comes standard with a set of segment rolls, lateral roll guides for coiling, and an easy to use control station. Baileigh Industrial machines always offer great value for the investment using only the highest quality components on the market.

Angle Roller R-H55

Angle Roller R-H55

 

Specifications:

Round Tube Capacity Size: 4″ (.083″) / Min. Dia.: 72″
Shaft Center Distance Lower Rolls 11.875″
Shaft Diameter 2.165″
Roll Adjustment Hydraulic
Lower Roll Dia. 6.693″
Solid Round Capacity Size: 2″ / Min. Dia. 28″
Pipe Capacity Size: 2.5″ (sch. 40) / Min. Dia.: 40″
Pinch Single
Square Tube Capacity Size: 2.75″ (.083″) / Min. Dia.: 54″
Angle Iron Capacity Size: 3″ (.250″)/ Min. Dia.: 36″
Digital Readout Yes
Flat Bar Easy Way Size: 5″ (.75″) / Min. Dia. 28″
Flat Bar Hard Way Size: 3.5″ (.675″)/ Min. Dia.: 32″
Power 220V / 3-phase
Shipping Weight 1,728 lbs.
Shipping Dimensions 60″ x 44″ x 68″